Sleipner SE80-IP Tunnel Thruster 12/24V (SE80/185T-IP)

In stock

The SE80 IP is suitable for a wide range of boats between 35-48 feet. With its 80-96 kgs of thrust and ignition protection, you get a safe and reliable thruster installation in boats with gasoline engines.

SKU: SE80/185T-IP
Boat length
10 - 15 m

The SE80 IP is suitable for a wide range of boats between 35-48 feet. With its 80-96 kgs of thrust and ignition protection, you get a safe and reliable thruster installation in boats with gasoline engines. Utilizing the same mechanical parts as the even more powerful SE100 makes it an exceptional energy-efficient thruster, and thereby a very popular model.

It is fitted either in a tunnel through the boat's bow or into a stern tunnel at the boat's stern using a stern thruster kit (sold separately). Remote control is a popular accessory. See some of the significant product features below.

Sleipner offers installation flexibility to work with the space you have. Our thruster models allow installation at any angle on the tunnel, tailored to fit any space available in your vessel.
power supply
Powered by direct current.
Flexible coupling protects the product’s driveline by compensating for misalignment between the shafts of the electric motor and gearleg.
This product is manufactured for installations in environments that may experience moist or occasional splashes.
Sleipner analog signal cables with Plug & Play connectors are color-coded to match the wiring diagrams with high-quality connectors to ensure a correct installation.
Automatic detection of overheating of internal components. When an unsafe temperature is detected, the unit is automatically shut off to prevent overheating.
Our ignition-protected products are compliant with ISO 8846 and ensure gasoline or other flammable fumes cannot enter or be ignited.
Immersed parts exposed to seawater are galvanic isolated from the onboard electrical system, eliminating stray currents.
The thruster gearleg is pre-filled for lifetime lubrication and sealed using a long-time mechanical seal with ceramic and carbon surfaces for ultimate security against water intrusion.
Twin propellers can provide more thrust than a single propeller system in the same tunnel diameter. We use this system in our mid-range models, where high thrust is required in small tunnel diameters. Due to the compact design and high performance, the twin models have become the thrusters of choice among boatbuilders worldwide.
The Q-PROP™ has measured noise reductions of up to 75% in controlled environments. The five-bladed skew propeller reduces noise levels while maintaining exceptional efficiency. Some thruster models even see an increase in thrust power.
  • The expected noise reduction in average installations: 20-40%
  • Upgrade kits are available for most Sleipner thruster models with special adaptors
Sleipner's patented intelligent power control provides a minimal delay between drive directions to reduce wear of the mechanical parts while monitoring solenoid functions. In the case of a solenoid lock-in, the thruster will automatically stop without extra user action or controlling the main switch.
  • (H) Height: 406mm / 15.98in
  • (L) Length: 327mm / 12.87in
  • (W) Width: 262mm / 10.31in
  • (ID) Internal Diameter: 185mm / 7.28in
  • (WD) Water Depth: 185mm / 7.28in
  • (TL) Recommended Tunnel Length: 216mm / 8.50in
  • (TL min.) Minimum Tunnel Length: 179mm / 7.05in
  • (T min.) Minimum Tunnel Wall Thickness: 6mm / 0.24in
  • (T max.) Maximum Tunnel Wall Thickness: 8mm / 0.31in
Stern dimensions
  • (L) Internal Length: 364mm / 14.3in
  • (+L) Tunnel Length: 265mm / 10.4in
  • (WD) Stern Water Depth: 185mm / 7.3in
  • (HT) Maximum Hull Thickness: 64mm / 2.5in
Operating PowerElectric
Power Requirement12V / 24V DC
Power Output4.4kW / 6hp
Thrust at 12V96kg / 212lbs
Thrust at 10.5V80kg / 176lbs
Thrust at 24V96kg / 212lbs
Thrust at 21V80kg / 176lbs
Operational Running Limit (min)2-3 duty cycle at 20° C
Nominal Current Draw530A
Min. Battery CCA (DIN)550
Min. Battery CCA (SAE)1045
Min. Battery CCA (EN)940
Recommended fuseANL 400
Ideal Vessel ClassMotor boat, Sail boat
Ideal Vessel Size10-15m / 35-48ft
Bow CapabilityYes
Stern CapabilityYes
Retractable CapabilityNo
External Mounting CapabilityNo
Tunnel CapabilityYes

Product Enquiry

Main Menu