Sleipner SEP60 PRO Tunnel Thruster 12/24V (SEP60/185S2)

The SEP60 PRO is one of Sleipner’s top-selling bow and stern thrusters typically used on boats between 8-11m.

SKU: SEP60/185S2
Boat length
8 - 11 m

The SEP60 PRO is one of Sleipner's top-selling bow and stern thrusters typically used on boats between 8-11m. With its 60-73 kgs of thrust and variable speed control, all you need to worry about when docking is getting the ropes ready.

It is fitted either in a tunnel through the boat's bow or into a stern tunnel at the boat's stern using a stern thruster kit (sold separately). Remote control is a popular accessory. See some of the significant product features below.

FLEXIBLE INSTALLATION
Sleipner offers installation flexibility to work with the space you have. Our thruster models allow installation at any angle on the tunnel, tailored to fit any space available in your vessel.
POWER SUPPLY
Powered by direct current.
OVERHEAT PROTECTION
Automatic detection of overheating of internal components. When an unsafe temperature is detected, the unit is automatically shut off to prevent overheating.
S-LINK™
S-Link™ is a CAN-based control system used for communication between Sleipner products installed on a vessel.
  • Compact and waterproof plugs
  • Keyed and color-coded connectors to ensure correct and easy installation
  • Different cable lengths, extenders and T-connectors makes the system scalable and flexible to install
PRO™
A PRO™ thruster system enables you to apply only the necessary power to complete your maneuver. The variable speed control eliminates the noise associated with standard on/off thrusters.

With a dual setup (bow and stern), you also get a practical hold function enabling you to set and leave the level of thrust.

GALVANIC SEPARATION
Immersed parts exposed to seawater are galvanic isolated from the onboard electrical system, eliminating stray currents.
SEALED DRIVE LUBRICATION
The thruster gearleg is pre-filled for lifetime lubrication and sealed using a long-time mechanical seal with ceramic and carbon surfaces for ultimate security against water intrusion.
SINGLE PROPELLER
A properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller thruster range. With more than 60.000 single propeller thrusters in use, the single propeller has proven its reliability.
Q-PROP™
The Q-PROP™ has measured noise reductions of up to 75% in controlled environments. The five-bladed skew propeller reduces noise levels while maintaining exceptional efficiency. Some thruster models even see an increase in thrust power.
  • The expected noise reduction in average installations: 20-40%
  • Upgrade kits are available for most Sleipner thruster models with special adaptors
INTELLIGENT POWER CONTROL
Sleipner's patented intelligent power control provides a minimal delay between drive directions to reduce wear of the mechanical parts while monitoring solenoid functions. In the case of a solenoid lock-in, the thruster will automatically stop without extra user action or controlling the main switch.
Dimensions
  • (H) Height: 250mm / 9.8in
  • (L) Length: 205mm / 8.1in
  • (W) Width: 201mm / 7.9in
  • (ID) Internal Diameter: 185mm / 7.3in
  • (WD) Water Depth: 185mm / 7.3in
  • (TL) Recommended Tunnel Length: 165mm / 6.5in
  • (TL min.) Minimum Tunnel Length: 128mm / 5in
  • (T min.) Minimum Tunnel Wall Thickness: 4mm / 0.16in
  • (T max.) Maximum Tunnel Wall Thickness: 6mm / 0.24in
  • (L) Internal Length: 231mm / 9.1in
  • (+L) Tunnel Length: 265mm / 10.4in
  • (WD) Stern Water Depth: 185mm / 7.3in
  • (HT) Maximum Hull Thickness: 43mm / 1.7in
Operating PowerElectric
Power Requirement12V DC
Power Output3.1kW / 4hp
Thrust at 12V / 24V73kg (161lbs)
Thrust at 10.5V / 21V60kg (132lbs)
Operational Running Limit (min)2-3 duty cycle at 20° C
Nominal Current Draw 12V / 24V370A / 170A
Min. Battery CCA (DIN) 12V / 24V350 / 175
Min. Battery CCA (SAE) 12V / 24V665 / 332
Min. Battery CCA (EN) 12V / 24V600 / 280
Recommended fuse 12V / 24VANL 325 / ANL 150
Ideal Vessel ClassMotor boat, Sail boat
Ideal Vessel Size8-11m (27-37ft)
Bow CapabilityYes
Stern CapabilityYes
Retractable CapabilityNo
External Mounting CapabilityNo
Tunnel CapabilityYes
Weight15kg / 33lbs

Product Enquiry

Main Menu