Sleipner SEP100 PRO IP Tunnel Thruster 12V/24V (SEP100/185T-IP)

The SEP100 IP PRO is the most powerful thruster available in the popular 185mm tunnel diameter and is thereby the optimal choice for boats between 35-55 feet where maximum thrust in a compact tunnel is required.

Κωδικός: SEP100/185T-IP
Μήκος σκάφους
12 - 17 m

Ετικέτες:

The SEP100 IP PRO is the most powerful thruster available in the popular 185mm tunnel diameter and is thereby the optimal choice for boats between 35-55 feet where maximum thrust in a compact tunnel is required. With its 100-116 kgs of thrust and variable speed control, all you need to worry about when docking is getting the ropes ready.

Also available in standard on/off and ignition protected version. Remote control is a popular accessory. Read more about the significant product features below.

FLEXIBLE INSTALLATION
Sleipner offers installation flexibility to work with the space you have. Our thruster models allow installation at any angle on the tunnel, tailored to fit any space available in your vessel.
POWER SUPPLY
Powered by direct current.
FLEXIBLE COUPLING
Flexible coupling protects the product’s driveline by compensating for misalignment between the shafts of the electric motor and gearleg.
SPLASH-PROOF
This product is manufactured for installations in environments that may experience moist or occasional splashes.
OVERHEAT PROTECTION
Automatic detection of overheating of internal components. When an unsafe temperature is detected, the unit is automatically shut off to prevent overheating.
S-LINK™
S-Link™ is a CAN-based control system used for communication between Sleipner products installed on a vessel.
  • Compact and waterproof plugs
  • Keyed and color-coded connectors to ensure correct and easy installation
  • Different cable lengths, extenders and T-connectors makes the system scalable and flexible to install
PRO™
A PRO™ thruster system enables you to apply only the necessary power to complete your maneuver. The variable speed control eliminates the noise associated with standard on/off thrusters.

With a dual setup (bow and stern), you also get a practical hold function enabling you to set and leave the level of thrust.

IGNITION PROTECTION
Our ignition-protected products are compliant with ISO 8846 and ensure gasoline or other flammable fumes cannot enter or be ignited.
GALVANIC SEPARATION
Immersed parts exposed to seawater are galvanic isolated from the onboard electrical system, eliminating stray currents.
SEALED DRIVE LUBRICATION
The thruster gearleg is pre-filled for lifetime lubrication and sealed using a long-time mechanical seal with ceramic and carbon surfaces for ultimate security against water intrusion.
TWIN PROPELLERS
Twin propellers can provide more thrust than a single propeller system in the same tunnel diameter. We use this system in our mid-range models, where high thrust is required in small tunnel diameters. Due to the compact design and high performance, the twin models have become the thrusters of choice among boatbuilders worldwide.
Q-PROP™
The Q-PROP™ has measured noise reductions of up to 75% in controlled environments. The five-bladed skew propeller reduces noise levels while maintaining exceptional efficiency. Some thruster models even see an increase in thrust power.
  • The expected noise reduction in average installations: 20-40%
  • Upgrade kits are available for most Sleipner thruster models with special adaptors
INTELLIGENT POWER CONTROL
Sleipner's patented intelligent power control provides a minimal delay between drive directions to reduce wear of the mechanical parts while monitoring solenoid functions. In the case of a solenoid lock-in, the thruster will automatically stop without extra user action or controlling the main switch.
Dimensions
  • (H) Height: 499mm / 19.65in
  • (L) Length: 381mm / 15in
  • (W) Width: 306mm / 12.05in
  • (ID) Internal Diameter: 185mm / 7.28in
  • (WD) Water Depth: 185mm / 7.28in
  • (TL) Recommended Tunnel Length: 195mm / 7.68in
  • (TL min.) Minimum Tunnel Length: 158mm / 6.22in
  • (T min.) Minimum Tunnel Wall Thickness: 6mm / 0.24in
  • (T max.) Maximum Tunnel Wall Thickness: 8mm / 0.31in
Stern dimensions
  • (L) Internal Length: 458mm / 18in
  • (+L) Tunnel Length: 265mm / 10.4in
  • (WD) Stern Water Depth: 185mm / 7.3in
  • (HT) Maximum Hull Thickness: 72mm / 2.8in
Operating PowerElectric
Power Requirement12V / 24V DC
Power Output6.3kW / 8.4hp
Thrust at 12V / 24V116kg / 256lbs
Thrust at 10.5V / 21V100kg / 220lbs
Operational Running Limit (min)2-3 duty cycle at 20° C
Nominal Current Draw 12V / 24V740A / 340A
Min. Battery CCA (DIN) 12V / 24V750 / 400
Min. Battery CCA (SAE) 12V / 24V1425 / 760
Min. Battery CCA (EN) 12V / 24V1320 / 680
Recommended fuse 12V / 24VANL 500 / ANL 325
Ideal Vessel ClassMotor boat, Sail boat
Ideal Vessel Size12-17m / 35-55ft
Bow CapabilityYes
Stern CapabilityYes
Retractable CapabilityNo
External Mounting CapabilityNo
Tunnel CapabilityYes

Product Enquiry

Main Menu