Sleipner SRL100 Retractable bow/stern thruster 12/24V (SRL100/185T)

The SRL100 is a sturdy retractable thruster suitable for cruiser-racers or flat-bottomed boats between 12-17m.

SKU: SRL100/185T
Boat length
12 - 17 m

The SRL100 is a sturdy retractable thruster suitable for cruiser-racers or flat-bottomed boats between 12-17m. With its quick deployment and 100-116 kgs of thrust, you get a thruster installation you can rely on year after year.

The SRL100 is also available in PRO with variable speed control.

Powered by direct current.
Flexible coupling protects the product’s driveline by compensating for misalignment between the shafts of the electric motor and gearleg.
Sleipner analog signal cables with Plug & Play connectors are color-coded to match the wiring diagrams with high-quality connectors to ensure a correct installation.
Automatic detection of overheating of internal components. When an unsafe temperature is detected, the unit is automatically shut off to prevent overheating.
Immersed parts exposed to seawater are galvanic isolated from the onboard electrical system, eliminating stray currents.
The thruster gearleg is pre-filled for lifetime lubrication and sealed using a long-time mechanical seal with ceramic and carbon surfaces for ultimate security against water intrusion.
Twin propellers can provide more thrust than a single propeller system in the same tunnel diameter. We use this system in our mid-range models, where high thrust is required in small tunnel diameters. Due to the compact design and high performance, the twin models have become the thrusters of choice among boatbuilders worldwide.
The Q-PROP™ has measured noise reductions of up to 75% in controlled environments. The five-bladed skew propeller reduces noise levels while maintaining exceptional efficiency. Some thruster models even see an increase in thrust power.
  • The expected noise reduction in average installations: 20-40%
  • Upgrade kits are available for most Sleipner thruster models with special adaptors
Sleipner's patented intelligent power control provides a minimal delay between drive directions to reduce wear of the mechanical parts while monitoring solenoid functions. In the case of a solenoid lock-in, the thruster will automatically stop without extra user action or controlling the main switch.
  • (H) Height: 243mm / 9.56in
  • (+H) Additional Height: 129mm / 5.07in
  • (L) Length: 561mm / 22.09in
  • (+L) Additional Length: 287mm / 11.29in
  • (W) Width: 359mm / 14.12in
  • (ID) Internal Diameter: 185mm / 7.28in
  • (WD) Water Depth: 185mm / 7.28in
  • (RD) Retract Depth: 276mm / 10.85in
  • (RW) Retract Width: 195mm / 7.66in
  • (MW) Mould Width: 257mm / 10.11in
  • (MH) Mould Height: 62mm / 2.43in
Operating PowerElectric
Power Requirement12V / 24V DC
Power Output6.3kW / 8.4hp
Thrust at 12V / 24V116kg (256lbs)
Thrust at 10.5V / 21V100kg (220lbs)
Operational Running Limit (min)2-3 duty cycle at 20° C
Nominal Current Draw 12V / 24V740A / 380A
Min. Battery CCA (DIN) 12V / 24V750 / 400
Min. Battery CCA (SAE) 12V / 24V1425 / 760
Min. Battery CCA (EN) 12V / 24V1320 / 680
Recommended fuse 12V / 24VANL 500 / ANL 325
Ideal Vessel ClassMotor boat, Sail boat
Ideal Vessel Size12-17m / 35-55ft
Bow CapabilityYes
Stern CapabilityYes
Retractable CapabilityYes
External Mounting CapabilityNo
Tunnel CapabilityNo
Weight44kg / 97lbs

Product Enquiry

Main Menu