Sleipner SRV300 Vertical Retractable bow/stern thruster 24V (SRV300/300TC)

In stock

The SRVP300 is a sturdy retractable thruster suitable for cruiser-racers or flat-bottomed boats between 22-30m.

SKU: SRV300/300TC
Boat length
22 - 30 m

The SRVP300 is a sturdy retractable thruster suitable for cruiser-racers or flat-bottomed boats between 22-30m. With its quick deployment and 300-340 kgs of thrust, you get a thruster installation you can rely on year after year. Vertical installation.
Powered by direct current.
Flexible coupling protects the product’s driveline by compensating for misalignment between the shafts of the electric motor and gearleg.
Sleipner analog signal cables with Plug & Play connectors are color-coded to match the wiring diagrams with high-quality connectors to ensure a correct installation.
Automatic detection of overheating of internal components. When an unsafe temperature is detected, the unit is automatically shut off to prevent overheating.
Immersed parts exposed to seawater are galvanic isolated from the onboard electrical system, eliminating stray currents.
The thruster gearleg is pre-filled for lifetime lubrication and sealed using a long-time mechanical seal with ceramic and carbon surfaces for ultimate security against water intrusion.
Two counter-rotating propellers offer the most thrust at a good performance ratio in a minimal tunnel diameter. This system is used in our larger thrusters for maximum power. Our twin-counter thruster range is the favorite among leading boatbuilders in high-end yachts.
The Q-PROP™ has measured noise reductions of up to 75% in controlled environments. The five-bladed skew propeller reduces noise levels while maintaining exceptional efficiency. Some thruster models even see an increase in thrust power.
  • The expected noise reduction in average installations: 20-40%
  • Upgrade kits are available for most Sleipner thruster models with special adaptors
Sleipner's patented intelligent power control provides a minimal delay between drive directions to reduce wear of the mechanical parts while monitoring solenoid functions. In the case of a solenoid lock-in, the thruster will automatically stop without extra user action or controlling the main switch.
  • (H) Height: 452mm / 17.8in
  • (+H) Additional Height: 172mm / 6.77in
  • (L) Length: 843mm / 33.19in
  • (W) Width: 580mm / 22.83in
  • (ID) Internal Diameter: 300mm / 11.81in
  • (WD) Water Depth: 197mm / 7.76in
  • (RD) Retract Depth: 445mm / 17.52in
  • (RW) Retract Width: 415mm / 16.34in
  • (MW) Mould Width: 480mm / 18.90in
  • (MH) Mould Height: 115mm / 4.53in
Operating PowerElectric
Power Requirement48V DC
Power Output15kW / 20hp
Thrust at 48V340kg (749lbs)
Thrust at 42V300kg (661lbs)
Operational Running Limit (min)2-3 duty cycle at 20° C
Nominal Current Draw400-450A
Min. Battery CCA (DIN)400
Min. Battery CCA (SAE)760
Min. Battery CCA (EN)680
Recommended fuseANL 325
Ideal Vessel ClassMotor boat, Sail boat
Ideal Vessel Size22-30m / 72-100ft
Bow CapabilityYes
Stern CapabilityYes
Retractable CapabilityYes
External Mounting CapabilityNo
Tunnel CapabilityNo
Weight120kg / 265lbs

Product Enquiry

Main Menu