Xantrex 815-2524-02 Freedom SW-2524, 230V AC/50Hz (24V DC)

True sine wave Inverter with 200% power surge for 5s to support motor loads.

Κωδικός: 815252402


True sine wave Inverter with 200% power surge for 5s to support motor loads. Generator support mode to supplement generator when AC loads exceed generator’s capacity. Stackable in parallel. Xanbus EnabledTM to work with Freedom SW Combox accessory to provide data logs and system control, accessible from your smartphone or tablet.
Premium sine wave performance and efficient, multi-stage charging
Just like its North American 110Vac counterpart, the NEW Freedom SW 230Vac inverter/charger offers premium sine wave performance and efficient, multi-stage charging. The 2x continuous power surge rating provides necessary start-up power for demanding applications including inductive motor loads. Available in two 230Vac/50Hz, 24Vdc models, the Freedom SW offers PARALLEL stacking capability to enable twice-the-rated output. Both models can operate in tandem with a generator to temporarily assist power loads with large start-up demands such as air conditioners, water pumps etc. A Xanbus AGS must be installed in the system in order for this feature work. Both are compatible with optional accessories such as the System Control Panel (SCP) and the Automatic Generator Start (AGS).

Designed for a variety of mobile 24Vdc applications such as commercial, emergency and recreational vehicle, marine vessel, bus, construction and other heavy duty applications.

  • True sine wave to support sensitive electronics
  • 200% for 5s surge for motor loads
  • Generator support mode
  • Xanbus Enabled
  • Parallel units to double inverter power
Electrical specifications – Inverter
Output power (continuous at 40° C)2500W
Surge rating (5 seconds)5000W
Output frequency50 Hz +/- 0.2 Hz
Output voltage230 V
Output wave formTrue sine wave
Optimal efficiency90%
No-load power draw (inverting)<1.9A DC
Input DC voltage range20 – 32V DC
AC connectionsSingle phase in / out
Electrical specifications – Battery charger
Output current (continuous at 25° C)65A
Output voltage24V DC
Output voltage range12 – 32V DC
Charge control3 stage with manual equalize
Charge temperature compensationRemote battery sensor (included)
Optmial Efficiency> 85%
AC input power factor (maximum charge)0.98 typical
Input current (for maximum charging)10.6A rms nominal
Input AC voltage230 V
Input AC voltage range170-270 V
Dead battery charge> 12V DC
General specifications
Compatible battery typesLiFePO4 / Flooded / gel / AGM
Transfer relay rating1 leg of 30A
Transfer time (AC to inverter and inverter to AC)< 20ms
Optimal operating temperature range– 20° C to 60° C: – 20° C
Charge temperature compensationRemote battery sensor (included)
Storage ambient temperature range– 40° C to 85° C
Part Number815-2524-02
L x W x H197x343x387mm
Net Weight21.4kg
SafetyCE Marking, Low Voltage Directive Compliant (Marine installations, drip shield, 808-9004)
EMCCE Marking, EMC Directive and Automotive EMC – Regulation 10 R E-Mark Compliant
EnvironmentalCE Marking, RoHS Directive Compliant

Product Enquiry

Main Menu